XKC—20F/FA/FC 30F/FA/FC small size precision CNC lathe is designed to meet the need for efficient and accurate automation production of medium to small diameter parts.thelathe is fitted with standard .Equipment of C-axis comtour control and optional accessory of revolving tools(for drilling ,slot Milling and rigid tapping),fiexible and combined machining makes it a fact on comb type tool rest lathe that composite machining equals single set up.
Machine Specifications
Capacity | Swing over bed | Ø240mm |
Swing over cross slide | Ø120mm | |
Max. maching diameter | Ø100mm | |
Max. maching length | 100mm | |
Spindle | Spindle speed | Max.6000r/min |
Number of spindle speed ranges | Stepless | |
Through hole diameter | 20F/FC/FA 30F/FC/FA: Ø20mm/ Ø30mm | |
Spring collet shank | 20F/FC/FA: Ø26mm 30F/FC/FA: Ø36mm | |
Axes | X-axis travel traverse | 20m/min |
Z-axis rapid traverse | 20m/min | |
X-axis travel | 200mm/250mm(Optional) | |
Z-axis travel | 180mm | |
Motor | Spindle drive motor | 20F/30F:2.2/3.7KW 20FA/30FA/20FC/30FC:3.7/5.5KW |
Feed motor | 0.75KW | |
Required electric power | 6KVA | |
Floor space | 1240*1360*1580mm | |
Height from floor to spindle center | 985mm | |
Mass of machine | 1100KG | |
Size | 1900*1490*1940mm | |
CNC unit Specifications
Control system | FANUC Oi-MATE TD/TF | |
Controlled axes | Simultaneously controllable 2axes, 1 axis in manual mode | |
Simultaneously controllable 3 axes ,1 axis in manual mode(only FC type) | ||
Input system | MDI keyboard input combine use of absolute / incremental programming | |
Part program storage length | 640M(512K) | |
Interpolation function | Linear Taper Circular Threading | |
Least input increment | 0.0001 | |
Least command incerment | X:0.0005 Z:0.001 | |
Feed rate | Feed per minute | 1-10000mm/min |
Feed per revolution | 0.0001-500mm/rev | |
Tool offset | Geometry | ±999.9999 |
Wear | ±9.9999 | |
Tool offset pairs | The 64 pairs | |
Number of register able program | 400个pairs | |
Manual handle feed | 0.5/0.1/0.01/0.001 | |
Auxiliary function | M S T | |
Dwell time | 0～99999.999秒seconds | |
Feed rate override | 0～150% | |
Rapid traverse override | F0、F25、F50、F100 | |
Input/output interface | RS232C | |
Display Language | Chinese / English | |
C contouring control (FC only) | Cs0.0001 (BZI encoder) | |
Standard appendage
Coolant device with chip tank | 1 Set |
Lighting unit | 1 Set |
Automatic slide surface lubricate | 1 Set |
Air lube unit | 1 Set |
Air type chuck opening /closing device | 1 Set |
Collet chuck blank | 1 piece |
Spindle split chuck adapter | 1 piece |
Preset base | 1 Set |
S1、S2 Tool holders S | 2 pieces each |
Tool holders S3/AH1/pulling - out device | 1 Set |
I.D Tool holder | 1 Set |
Milling collet chuck | 1 Set |
Tools and tool box | 1 Set |
Circuit breake | 1 Set |
Machine base | 4 piece |
Machine vinyl cover | 1 Set |
Signal lamp | 1 Set |
Spindle split chuck | 4 piece |
Air blower system | 1 piece |
Part total preset counter | 1 Set |
Spindle locking device (mechanical locking device) | 1 Set |
C Contouring control(only FC type) | 1 Set |
Optional Accessories
Various spindle split chuck |
Various tool holder |
Parts conveyer |
Power chuck 4 |
Cross driven tools |
Auto-loader and unloader |
Parts feeder |
Kinds of cutters |
Main spindle fixed position stopping device(with air type locking device) |
