The space in precision machining for small diameter parts and design, low cost of the lathe spindle motor adopts frequency conversion motor or FANUC servo motor, has the advantages of small volume, large stroke, high spindle speed, high feed accuracy, easy operation, easy maintenance, has the advantages of smooth chip removal. The achieved high precision CNC.XKC-7520 series of small precision CNC lathe lathe successfully meets the small diameter high precision, high efficiency to automatic processing.
Main machine tool design features:
1.High precision spindle- The cartridge type spindle of lathe is supported by japan super precision bearings .The arrangement of 3 front bearings and 2 rear bearings ensure high rigidity and lasting accuracy of spindle .Spindle run out is less than <3μm.
2.Extra heavy cutting-Hydraulic combined with high speed and high accuracy combined with rigid and precise power chuck increase greatly heavy cutting and tough metal cutting capacity.
3.Control system-Driven by FANUC control systems that enable the lathes with great stability.
4.High efficiency machining-Max.speed of spindle is 5500rev/min, rapid traverse rate of X and Z axes is up to 18m/min .Auto parts feeder can be equipped to fulfill fast and efficient automation production.
5.Comb type tool rest-The unique design of comb type tool rest gives minimumrepeatability error during tool change ,it is fast.Precise and considerably time saving.
6.Accurate feeding-Each feeding axis is driven by servo motors through japan NSK、THK precision ball screws,machining accuracy is ensured and long time accuracy is remained .repeatability is less than < 1μm.
7.Machine bed construction-High rigidity meehanite cast iron 60° slant bed,easy chip removal,compact design ,beautiful appearance.
Machine Specifications
Range of work | Swing over bed | Ø400mm |
Swing over cross slide | Ø90mm | |
Max. turning diameter | Ø360mm | |
Max.turning length | 200mm | |
Spindle | Spindle speed | 4500rpm (Chuck) 5500rpm (Collet chuck) |
Through hole diameter | Chuck Ø45mm / Collet Ø42mm | |
Spindle bore | Ø57mm | |
Main motor | XKC7520:5.5KW XKC7520A/C:5.5KW/7.5KW-FANUC | |
Blade adapter | Number of stations | 7 |
Tool size (Turning tool / Boring tool) | 20*20/ Ø25mm | |
Axes | X travel | 360mm |
Z travel | 400mm | |
Maximum speed of X/Z axis | 18m/min | |
X/Z feed motor | Servo 1.2KW | |
C axis (only 7520C) | Minimum control angle | 0.001 degree (Bzi encoder) |
Others | Collet chuck | 5 Inches |
Hollow hydraulic cylinder | 6 Inches | |
Power capacity | 12KWV | |
Floor space(L*W*H) | 2360*1569*1810mm | |
Weight of Machine | About 2800KG |
Standard Specification for CNC device
Control system | FANUC Oi-MATE TD/TF | |
Controlled axes | At the same time, the 2 axis, the manual 1 axis | |
At the same time, 3 axes, manual 1 axis (only 7520C) | ||
Input system | MDI keyboard input combine use of absolute / incremental programming | |
Part program storage length | 640M(512K) | |
Interpolation function | Linear Taper circular threading | |
Least input increment | 0.0001 | |
Least command incerment | X:0.0005 Z:0.001 | |
Cutting feed rate | Feed per minute | 1-10000mm/min |
Feed per revolution | 0.0001-500mm/rev | |
Tool offset | Geometry | ±999.9999 |
Wear | ±9.9999 | |
Tool offset pairs | The 64 group | |
Number of register able program | 400 | |
Manual handle feed | 0.5/0.1/0.01/0.001 | |
Auxiliary function | M S T | |
Dwell time | 0～99999.999 s | |
Feed rate override | 0～150% | |
Rapid traverse override | F0、F25、F50、F100 | |
Input/output interface | RS232C | |
Display Language | Chinese / English | |
C axis contouring control (only 7520C) | Cs0.001 °(Bzi encoder) | |
Standard appendage
Coolant device with chip tank | 1 Set |
Lighting unit | 1 Set |
Automatic slide surface lubricate | 1 Set |
Hydraulic clamping unit | 1 Set |
Preset base | 1 piece |
S1、S2 Tool holders S | 1 pieces each |
S3 Tool holders S3 | 2 piece |
I.D Tool holder | 1 piece |
Milling collet chuck | 1 Set |
Tools and tool box | 1 Set |
Circuit breake | 1 Set |
Machine base | 4 piece |
Machine vinyl cover | 1 Set |
Signal lamp | 1 Set |
Hydraulic chuck (6 inch) | 1 Set |
Transformer | 1 Set |
Heat exchanger | 1 Set |
Machine full enclosed housing | 1 Set |
C axis contouring control（7520C only) | 1 Set |
Special appendages
The hydraulic collet chuck(5 inch) “with 1 spring collet” |
Parts feeder |
Auto parts catcher |
Parts conveyer |
Spring collet chuck |
Kinds of cutters |
400W power tool device |
Pneumatic system |
Various fixture and jigs |
Counter |
Sleeve |
Chip conveyor |
